Today, Baijiahui, a professional LED street light manufacturer, shares the top ten functions of LED street light lamp holders.

1. The transparent lampshade is made of imported polycarbonate injection, with high strength and good light transmittance.
2. High-power LED street lights have a long service life, which is 5-10 times longer than traditional lights. The LED light source adopts the most mature white light 1W package at present, and the surface is soldered on a 2mm thick aluminum-based circuit board, and then the aluminum substrate is installed on the plane of the radiator to ensure that the heat is quickly transferred to the radiator. In addition, the integrated design of the radiator and the lamp housing fully guarantees the LED heat dissipation requirements and service life.
3. Modular integrated design, can be arbitrarily combined into products with different power and brightness requirements, each module is an independent light source and interchangeable, local failure will not affect the normal operation of the entire lamp, easy to disassemble and maintain, and save maintenance cost.
4. The appearance is light and thin, which can effectively reduce the wind resistance, reduce the load of the light pole, and enhance the safety factor.
5. Intelligent control, constant current drive, power can be adjusted intelligently according to needs. The combination of single-chip microcomputer and traditional power converter can realize the intelligent control of high-power LED light source: light control + time control + automatic power adjustment.
6. Low undesirable glare and light pollution: The illumination angle of the LED light source can be designed according to needs, which can greatly reduce glare and light pollution, and greatly improve the effective utilization of light.
7. The operating voltage is low, and its advantages are: ①It will not cause the lampshade to turn black due to high-pressure adsorption of dust like ordinary street lamps, and ②Safe and reliable.
8. The working temperature is low. The LED light source is a cold light source. When the heat dissipation is good, the working temperature is lower than 600C, which will not cause the lampshade to age and yellow.
9. There is no delay in starting. The normal brightness can be reached when the power is turned on, and there is no need to wait, which eliminates the problem of long start-up time and repeated start-up of traditional street lamps.
10. No flicker. Pure DC work eliminates visual fatigue caused by traditional street lamp stroboscopic; impact resistance, strong shock resistance, no filament and glass shell, no problem of traditional lamp fragmentation.